Application Assistance Form

Thank you for contacting Glentek for your Servo System requirements. With over 38 years experience in the design and manufacture of servo amplifiers, servo motors and motion controllers, we have a vast pool of applications knowledge waiting to help you. In order for us to better serve you, please fill out the following application/request questionnaire (to the best of your knowledge) and click on the "Send Request" button at the bottom of the page.

Fields marked with an asterisk (*) are required to submit this form.

Contact Information
Company Name: Contact Name:	* *
Street Address:
City: State/Prov: Country: Postal/Zip Code :
Phone: E-mail:	Ext: Fax: *
How did you hear of Glentek?

Application Information
Prototype Quantity:
Production Quantity:
Target Cost:
Current Servo Vendor:
Reason for change:
Select type of product below by filling out the information requested.
1. Digital PWM Amplifier.
A. Current, Velocity, Step/Direction:
B. Encoder type: Sinusoidal or Incremental:
C. Encoder resolution in lines per revolution:
D. Continuous Output Current (Amps):
E. Peak Output Current (Amps):
F. Input Voltage, 1phase AC, 3phase AC or DC:
G. Module, Stand Alone, or Multi Axis (Specify quantity):
H. Serial Interface: RS232/RS485 (Single/multi axis):
2. Digital Motion Controller.
A. Encoder type: Sinusoidal or Incremental:
B. Encoder resolution in lines per revolution:
C. Continuous Output Current (Amps):
D. Peak Output Current (Amps):
E. Input Voltage, 1phase AC, 3phase AC or DC:
F. Module, Stand Alone, or Multi Axis (Specify quantity):
G. Serial Interface: RS232/RS485 (Single/multi axis) or CAN/RS232/RS485:
H. I/O Required:
I. Describe Profile Required:
3. Analog Amplifier: PWM or Linear, Brush or Brushless.
A. Brush or Brushless:
B. PWM or Linear:
C. Current (torque), Velocity (rpm), or 2phase/3phase Current Mode:
D. Type of Controller:
E. Motor Feedback: Hall Sensor, Resolver, Encoder, Encoder w/Commtracks , or Tach:
F. Continuous Output Current (Amps):
G. Peak Output Current (Amps):
H. Input Voltage. 1phase AC, 3phase AC or DC:
I. Module, 3U Plug-in, Stand Alone, or Multi Axis (Specify quantity):
4. Motor Application
A. Number of Axis per System:
B. Describe each axis speed torque requirements:
C. Continuous Torque in in-lbs:
D. Peak Torque in in-lbs:
E. Stall Torque in in-lbs:
F. Continuous RPM:
G. Maximum RPM:
H. Brush or Brushless:
I. Feedback: Hall Sensor, Resolver, Encoder, Encoder w/Commtracks, or Tach:
J. Feedback Resolution: Tach Voltage, Encoder Lines:
K. Brake Required:
L. Flange: Square or Round:
M. Flange: English, Metric or Special:
N. Shaft Type: Standard or Special:
O. Lead Termination: MS Connector, NPT, Flying Leads or Other:
P. Shaft Seal Required:
Q. Special Environmental Constraints:
R. Comments:

Or contact us at: sales@glentek.com